If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Who else is connected to network
Is there a way to find out the LOCAL IP address (10.1.x.x or 192.168.0.x) of
the other computers connected to your LAN? That is without having to go to the various machines and checking their individual IP addresses. |
Ads |
#2
|
|||
|
|||
You can either use NetTools or type "netstat" in the command mode to get a list of established connection.
|
#3
|
|||
|
|||
Who else is connected to network
There are various utilities which will portscan the local subnet, but of
course these cannot identify computers which are turned-off at the time. http://download.cnet.com/WS-Ping-Pro...-10012207.html If you use a server, there are various ways to record the IP of computers which connect to it, as the connections are made. This is more effective than the above, but may still miss a few if they never log-on during the monitoring period. Basically this is why you should either use DHCP, or else be thorough about ensuring that all IP allocations are documented. Once you have undocumented allocations you have a management problem! "jm7" wrote: Is there a way to find out the LOCAL IP address (10.1.x.x or 192.168.0.x) of the other computers connected to your LAN? That is without having to go to the various machines and checking their individual IP addresses. . |
#4
|
|||
|
|||
Who else is connected to network
There are various utilities which will portscan the local subnet, but of
course these cannot identify computers which are turned-off at the time. http://download.cnet.com/WS-Ping-Pro...-10012207.html If you use a server, there are various ways to record the IP of computers which connect to it, as the connections are made. This is more effective than the above, but may still miss a few if they never log-on during the monitoring period. Basically this is why you should either use DHCP, or else be thorough about ensuring that all IP allocations are documented. Once you have undocumented allocations you have a management problem! "jm7" wrote: Is there a way to find out the LOCAL IP address (10.1.x.x or 192.168.0.x) of the other computers connected to your LAN? That is without having to go to the various machines and checking their individual IP addresses. . |
#5
|
|||
|
|||
Who else is connected to network
Forget the link in my previous post, that utility is no longer free.
http://nirsoft.net/utils/netresview.html Would seem to be a better tool, and is free. There are various utilities which will portscan the local subnet, but of course these cannot identify computers which are turned-off at the time. |
#6
|
|||
|
|||
Who else is connected to network
Forget the link in my previous post, that utility is no longer free.
http://nirsoft.net/utils/netresview.html Would seem to be a better tool, and is free. There are various utilities which will portscan the local subnet, but of course these cannot identify computers which are turned-off at the time. |
#7
|
|||
|
|||
Who else is connected to network
Hi
Maybe this can Help, http://www.softperfect.com/products/networkscanner/ Jack (MS, MVP-Networking). "jm7" wrote in message ... Is there a way to find out the LOCAL IP address (10.1.x.x or 192.168.0.x) of the other computers connected to your LAN? That is without having to go to the various machines and checking their individual IP addresses. |
#8
|
|||
|
|||
Who else is connected to network
Hi
Maybe this can Help, http://www.softperfect.com/products/networkscanner/ Jack (MS, MVP-Networking). "jm7" wrote in message ... Is there a way to find out the LOCAL IP address (10.1.x.x or 192.168.0.x) of the other computers connected to your LAN? That is without having to go to the various machines and checking their individual IP addresses. |
#9
|
|||
|
|||
Who else is connected to network
Thanks Jack, That's exactly what I wanted.
|
#10
|
|||
|
|||
Who else is connected to network
Thanks Jack, That's exactly what I wanted.
|
Thread Tools | |
Display Modes | |
|
|